VIDEO 12: How to Install Tub Windows

Installing the window and window frame in your tubs is made easy with this instructional video! Freedom Breeder Racks offer the best quality and convenience for reptile and rodent breeders. Our helpful videos will get you up and running in no time.

← Watch video 11         Watch Video 13 →

Visit our New YouTube page!

How to Install Tub Windows

Freedom Breeder tubs with windows are shipped without the windows installed to save you on shipping costs and to protect your product from damage during shipping. In this video we’re going to show you how to install your windows. All you will need is a rivet gun. All other supplies are shipped with your tubs. The window frame is installed on the inside of the tub. We recommend starting the installation from the middle of the frame. Insert a rivet into your gun. Place a plastic cup washer over the rivet gun with the open cup side facing the gun. Insert the other end of the rivet through the hole in the front of the outside of the tub and thrive the window bracket. Place the small metal washer inside the plastic cup washer and put it over the end of the rivet with the metal washer facing into the tub. Now simply pull the trigger on your rivet gun to secure the washers in place. Repeat this step for every hole. Then place the color matching caps over the plastic washers both inside and outside the tub. Just apply a little pressure and the caps will snap into place. You’re almost done. Now just remove the protective sticker from both sides of your window and drop it in place in the window bracket and you’re done.

Our highly trained and skilled craftsmen build all Freedom Breeder racks in-house. As a result, our staff is able to make changes immediately. We take pride in our product and strive to be the best. Probe placement is an essential part of modern reptile keeping, so we are making sure to keep up with new advancements in husbandry.

Many have tried to copy our racks throughout the years. No one has been able to copy our quality. Third party companies make most of the copy cat racks. This is because making stainless steel caging involves the use of heavy duty machinery. Freedom Breeder has now been building these racks for over 19 years. So it only makes sense that professionals back our products. Freedom Breeder Racks are used around the world by zoos, research centers, colleges and top breeders. We have a solid track record of proving that we make the highest quality product because of this.

It is because we are breeders and manufacturers ourselves that we give you the best quality products and service in the industry. We use all of our own products on a large scale. Therefore our products are on the cutting edge in design and will save you time and space. Your production is increased all the while. We are committed to our product. So we will always be here to answer any questions or concerns you might have, first hand.

We at Freedom Breeder would like to thank you for considering our products!